Whitby town centre and harbour 3D Printed City Map — 9×9cm Relief Model

What this model shows

Whitby 3D city map captures the harbour town where the River Esk meets the North Sea. The model covers a 1km square centred on the harbour, the East and West Cliffs, and the streets climbing toward the abbey headland. St Mary's Church sits on the East Cliff above the 199 steps, with the ruins of Whitby Abbey on the skyline beyond.

The town's twin cliffs are bisected by the Esk and joined by the swing bridge, with red-pantiled cottages packed along the harbour's east side in the conservation area. St Mary's Church is Grade I listed, as is the former Whitby Youth Hostel on the abbey headland. The Grade II* Old Town Hall stands in the Market Place on the east bank, while Captain Cook's connection to the port is marked at the museum and by the replica Endeavour moored in the harbour.

The Whitby plate prints at 1:11,000 on a 9 × 9 cm base, so a 100 m city block is about 9 mm across and a single street is a fraction of a millimetre wide — the relief is the real measured shape of one square kilometre, with no vertical exaggeration.

A Whitby gift for anyone who knows the harbour and the 199 steps — 1 km of the town and the Esk mouth at 1:11000, the North Sea modelled as open water, not invented streets.

Specification

9 × 9 cm · 1:11,000 scale · matte PLA · black ribbed base (white free on request) · stainless-steel laser-engraved label

FAQ

What does the model show?
Building footprints, building heights measured from LIDAR rather than estimated, and the underlying topography of the ground itself. Roads are engraved as shallow grooves, water is cut hollow below the surface, and bridges carry across as solid decks rather than free-standing spans. Everything is held at true 1:11000 scale with no vertical exaggeration, so the relief is the real measured shape of that square kilometre.

How are bridges and fine structures printed?
Each plate is one continuous 3D print, so anything that would hang in mid-air is filled in for strength. A bridge prints as a solid deck joined to the ground on each bank — the open gap beneath it, and the cables or piers that hold a real span, are closed in rather than left floating. Fine features such as railings or a single narrow footbridge can merge into the surface. Footprints and positions stay true to the survey; only the unsupported structure underneath is solidified, so the model survives handling and shipping.

How long until it ships?
Each model is printed to order in Sheffield, so production takes up to 7 working days before dispatch. It then ships by Royal Mail Tracked 48, which is 2–3 days within the UK, and a tracking number is emailed when the parcel is handed over. UK delivery is free. International shipping isn't available at launch.

Can I request a different area or city?
Yes. The custom-coordinates listing covers any UK location at the same 9 cm × 9 cm format and 1:11000 scale, so you can centre the square kilometre wherever you like — a childhood street, a university, a harbour. You can also message the shop with an area you'd like added to the standing catalogue, and it may become a ready-to-ship model for everyone.

Why black and white?
The black ribbed base gives the topography enough contrast to read at a glance, while the white relief shows the building geometry without competing with the base beneath it. It is a deliberate, restrained palette that keeps attention on the measured shape of the city rather than on colour. A white base is free on request — just message before ordering.

Where does the data come from?
Building heights and ground terrain come from national aerial LIDAR — the Environment Agency in England, the Scottish Remote Sensing Portal in Scotland, and Natural Resources Wales in Wales — accurate to a few centimetres. Building footprints, water, and the street grid come from OpenStreetMap. Both are open data, released under the Open Government Licence and the ODbL respectively, and the required attribution is printed on the thank-you card inside every order.

Is Whitby Abbey included in the model?
The abbey headland and St Mary's Church on the East Cliff fall inside the 1km square. The ruins themselves sit at the edge of the modelled area, just above the 199 steps.